Single Pair Ethernet - Sect. 2xAWG26/7 – Tape & Braid Shielded - PUR jacket AWM Style 20554 (80°C/30V)
CODE: 86A26SS2C7-004
Homologation UL AWM style: 20554
Accordance to Directives: 2011/65/CE; 2015/863/UE
Accordance to Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
GENERAL CONSTRUCTION
Conductor
Stranded bare copper wire 7x0.16mm (nom. 0.14mm²- AWG26); nominal diameter 0.48mm.
Lay agree with UL 758 tab 5.9; conform to EN 13602 - ETP1, DIN 40500 E-Cu 58.
Insulation
Foam PE compound; nominal diameter 1.03mm; Colour cores: Blue - White polarized Blue.
Assembly
Two cores twisted in a pair with fillers in gap.
Protective tape
Optional tape over assembly.
Jacket
PUR compound; diameter 4.5 ±0.2mm; colour Green similar RAL6018; conform to UL AWM Style 20554.
TECHNICAL DATA
Electric
Operating voltage 300 Vrms (UL 30 V)
Voltage test 500 Vac
Max conductor resistance
150.3 Ω/Km (IEC60344)
Impedance
100 Ω ±15%
Cable suitable for installation in coexistence with Category I energy cables with
voltage rating up to 0,6/1 KV according to CEI-UNEL 36762.
Physical
Operating temperature range -40°C to +80°C (fixed)
Operating temperature range -25°C to +80°C (flex)
Minimum bending radius 5 x D (fixed)
Minimum bending radius 12.5 x D (flex)
UV resistant yes (UL1581 Standard requirement on complete cable)
Chemical
Oil resistant yes (UL758)
Silicone, Pb, Cd, Hg, FCKW free yes
Halogen free yes (CEI EN 60754-1 / VDE 0482-754-1)
Flame
UL Horizontal flame test; CSA FT2; IEC 60332-1-2
Accordance to:
IEC 61156-12
Cavi BUS e DATI questa tipologia di cavo viene utilizzata per gestire la trasmissione dati per sistemi complessi dove sono richiesti valori di impedenza e velocità di trasmissione. Sono disponibili due gamme di prodotti per installazione dinamica o installazione statica, conformi alle approvazioni UL, CSA e DESINA.