PROFIBUS Cable 2xAWG24 – Braid shielded - PUR jacket AWM
Style 20233 (80°C / 300V)
CODE: 86A24SS203-E30
Homologation UL AWM style: 20233
Accordance to Directives:2014/35/UE; 2011/65/CE; 2015/863/UE
Accordance to Directives:
Electrical Equipment (Safety) Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
GENERAL CONSTRUCTION
Conductor
Stranded bare copper wire 0.13mm; Nom. 0.25mm² - AWG24; nominal diameter 0.65mm.
Lay agree with UL 758 tab 5.9; conform to EN 13602 - ETP1, DIN 40500 E-Cu 58.
Insulation
Foam polyolefin; Nominal diameter 2.55mm; Colour cores: Green – Red..
Assembly
Two cores stranded together with filler in gap.
Shield
- Al/PET tape; Aluminium face outside; optical coverage 100%.
- Braid type; tin copper wire; nominal optical coverage 85%.
Protective tape
Taper over assembly and over shield.
Jacket
PUR (ether base), hardness 90 ShA; Diameter 8.1 ±0.2mm; colour Violet similar RAL4001; conform to UL AWM Style 20233.
TECHNICAL DATA
Electric
Operating voltage 300 Vrms
Voltage test 700 Vac
Max conductor resistance 78.4 Ω/Km (IEC60344)
Nominal impedance @ 1MHz 150 Ω
Nominal capacitance @ 1KHz: 29 pF/m
Physical
Operating temperature range -40°C to +80°C (fixed)
Operating temperature range -25°C to +80°C (flex, free movement not continuous)
Minimum bending radius 7.5 x D (fixed)
Minimum bending radius 12.5 x D (flex, free movement not continuous)
Chemical
Oil resistant yes (UL 758)
Silicone, Pb, Cd, Hg, FCKW free yes
Halogen free yes (CEI EN 60754-1 / VDE 0482-754-1)
Electrical and transmission
properties at 20°C
Nominal impedance @ 1MHz 150 Ω
Nominal capacitance @ 1KHz 29 pF/m
Propagation velocity approx 67%
Insulation reistance >5.0 GxKm
Attenuation at 250 KHz <0.9 db/100m
Attenuation at 625 KHz <1.0 db/100m
Attenuation at 1.25 MHz <1.4 db/100m
Attenuation at 4 MHz <2.7 db/100m
Attenuation at 16 MHz <5.5 db/100m
Flame
Flame resistant UL Cable flame test; CSA FT1; IEC 60332-1-2
Movement data @20°C
Minimum bending radius 20 x D
Bending cycles 500000 cycles (1 Mio stroke)
Max speed 120 m/min
Max acceleration 60 m/sec²
Cavi BUS e DATI questa tipologia di cavo viene utilizzata per gestire la trasmissione dati per sistemi complessi dove sono richiesti valori di impedenza e velocità di trasmissione. Sono disponibili due gamme di prodotti per installazione dinamica o installazione statica, conformi alle approvazioni UL, CSA e DESINA.