Industrial Ethernet Cable Cat.7 – Sect. 4x(2xAWG26/7) -
PUR jacket O.D. 6.90mm - AWM Style 20236 (80°C / 30V)
CODE: 86A26SS8C7-004
UL AWM style: 20236 (80°C/30V)
Accordance to Directives: 2011/65/CE; 2015/863/UE
Accordance to Directives: The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
GENERAL CONSTRUCTION
Conductor
Stranded bare copper wire 7x0.16mm (nom. section 0.14mm²- AWG26); nominal diameter 0.48mm.
Lay agree with UL 758 tab 5.9; conform to EN 13602 - ETP1, DIN 40500 E-Cu 58.
Insulation
PEE compound (02Y); nominal diameter 1.03mm; colours Orange - White polarized Orange - Green –
White polarized Green – Brown - White polarized Brown - Blue - White polarized Blue
Pairs assembly
Cores twisted in pairs; Pairs colours (Orange - White pol. Orange) - (Green - White pol. Green) - (Brown - White pol. Brown) - (Blue - White pol. Blue).
Pairs shield
Each pair shielded with Al/PET tape (Aluminium face outside); optical coverage 100%.
Total assembly
Braid type; Tin copper wire; nom. optical Coverage 75%.
Total shield
Braid type; Tin copper wire; nominal optical Coverage 80%.
Jacket
PUR compound (11Y); diameter 6.9 ±0.2 mm; colour Green similar RAL6026.
Package
Plywood spool d. 800mm
TECHNICAL DATA
Electric
Operating voltage 50 Vrms (UL 30V)
Voltage test 500 Vac
Physical
Operating temperature range -40°C to +80°C (fixed)
Operating temperature range -25°C to +80°C (flex)
Minimum bending radius 7.5 x D (fixed)
UV resistant - yes (UL1581)
Chemical
Oil resistance - yes (UL758;
Silicone, Pb, Cd, Hg, FCKW free - yes
Halogen free - yes (CEI EN 60754-1 / VDE 0482-754-1)
Movement data @20°C:
Minimum bending radius* 10 x D
Bending cycles* 4 Mio (8 Mio Stroke)
Max speed* 300 m/min
Max Acceleration* 50 m/sec²
Torsion*: ± 90°/m (5 Mio cycles)
Electrical transmission properties @20°C:
Max electric resistance 150.3 Ω/Km (IEC 60344)
Nominal Impedance 100 Ω
Capacitance @1KHz 47 pF/m (nominal)
Propagation velocity 80 % (nominal)
Propagation delay <534 ns/100m
Delay skew <45 ns/100m
Transfer Impedance 5 mΩ/m @10MHz
Channel Class D (Cat5e – 100MHz) max 72m (0.8 dB loss for RJ45 connectors)
Channel Class E (Cat6 – 250MHz) max 67m (0.8 dB loss for RJ45 connectors)
Channel Class EA (Cat6A – 500MHz) max 67m (0.8 dB loss for RJ45 connectors)
Channel Class F (Cat7 – 600MHz) max 67m (0.8 dB loss for TERA connectors)
Flame
UL Cable flame test; UL VW-1; CSA FT1; IEC 60332-1-2
Accordance to:
IEC 61156-6 - Work area wiring Cat.7
ISO11801-1 §9.3.2.6 - Flexible cable Class F
Suitable for Fast Connect technology
BUS and DATA cables this type of cable is used to manage data transmission for complex systems where impedance values and transmission speed are required. Two ranges of products are available for dynamic installation or static installation, in compliance with UL, CSA and DESINA approvals.